VFD Control Panel

  • VFD Control Panel
  • VFD Control Panel
  • VFD Control Panel
  • video
VFD Control Panel
  • ZK
  • China
  • 2-7days
  • 300pcs/day

S100 motor VFD variable speed drive frequency inverter for motor speed controll
S100 series is a high performance General Purpose Frequency Inverter with current vector control. It mostly used to control and adjust the speed and torque of the 3 phase induction motor and also PMSM. It adopts mature platform of software and hardware with a high level standard design.
Functional optimization, flexible application, stable performance, wide voltage range design. Match with RoHS standard, excellent EMC performance, high performance, high quality to make it more comfortable for using.

S100 adopts high performance VECTOR control technology, higher torque output in low speed. Good dynamic characteristics, super overload capacity to make it easy to meet the demands of variable applications.

Main characteristics:

Hardware designExcellent performanceHigh stabilityEasy using
Optimized structural design with high level platformStability the speed, widen speed rangeLong life designInstantaneous stop constantly function
IGBT module equipped with full inverterHigh speed output in vector control mode, fast dynamic responseNew technology platform,big allowance derate designOver excitation protection
Independent air duct design with good heat dissipationBig torque in low speed,low torque impulseConformal coating PCBV/F complete separation and half a separation
High EMC performance,small external disturbance,lower harmonic outputSpeed tracking in hardware and softwareQualified temperature testPump and fan energy saving
CE,RoHS standardDrive multiple motor typeFull protection functionFlexible terminal function

High performance in auto tuning modeReliable thermal designBuilt-in PID function

Technical specification:

Control modeControl modeV/F controlSensorless in open loopClose loop vector control
Starting torque0.5Hz 150%0.5Hz 180%0.00Hz 180%
Speed adjust range0: 501:1001:1000

Speed stabilizing


Torque precisionNONO±5%
Motor type

General induction motor

permanent magnet synchronous motor (PMSM )

Function designHighest frequency

General vector control :320Hz

V/f control: 3200Hz

frequency resolution

Digital setting: 0.01Hz

Analog setting:maximum×0.025%

Carrier frequency0.5K~16KHz, the carrier frequency can be adjusted by temperature automatically
Frequency reference setting methodDigital of Control panel, analog AI1, AI2, potentiometer of control panel, UP/DN control, communication, PLC pulse frequency
Acceleration./deceleration characteristicLinear curve and S curve accel. /decel. mode, range of time: 0.0 to 65000S.
V/F curve3 mode: linear, multiple points, N Power
V/F separation2 times separation: totally separation, half separation
DC braking

DC braking frequency: 0.0 to 300Hz,

DC braking current: 0.0% to 100%

Braking unitStandard built in for up to 4T22G (22kw), optional built it for 4T30G~4T110G (30kw to 110kw), external built for above 4T160kw .
Jog functionJob frequency range: 0.0 to 50.0Hz, the acceleration and deceleration time of Jog
Configured PID functionEasy to perform pressure, flow, temperature close loop control.
PLC multiple speedTo achieve 16 segment speed running through built in PLC or terminal control
Common Dc busMultiple drives use one DC bus for energy balance.
Auto voltage regulation (AVR)Enable to keep output voltage constant when grid fluctuation
Over load tolerance capability

G type model: 150% rated current for 60s, 180% rated current for 3s,

P type Model: 120% rated current for 60s, 150% rated current for 3s.

Stall protection control when over current, over voltageCarry out limiting automation for running current, voltage to prevent over current, over voltage frequently
Rapid current limit functionMinimize the IGBT module broken to protect the AC Drive, maximum reduce the over current fault.
Torque limit and torque control

"Excavator" characteristics , torque limit automatically during motor running. Torque control is available in close loop vector control mode.

FeaturesFriendly interfaceDisplay “Hello” when power on.
Multiple function key JOG buttonIt can set for Forward Jog, reverse Jog, forward/reverse switch
Timing control functionA total running time and total running time calculating
2 group motor parametersTo achieve two motor switchover freely, control mode is selectable
Motor over heat protectionAccepting motor temperature sensor signal input via AI1 terminals.
Multiple kinds encoder *Compatible collector PG, differential PG, and rotary transformer Encoder( resolver).
Command sourceControl panel, control terminals, series communication, switch freely.
Frequency sourceDigital setting, analog current/voltage, pulse setting, serial communication, main and auxiliary combination.
Protection functionShort circuit detect when power on, input/output phase loss, over voltage, over current, under voltage, over heat, over load protection.
EnvironmentApplication siteIndoor, free of exposure to sunlight, no dusty, no corrosive, no inflammable gas, no oil and water vapor, and water dipping
AltitudeLower 1000m
Environment temperature-10℃~+40℃, power derated for 40~50℃, rated current derated 1% for 1℃ increasing.
humidityLess than 95%, no water condense.
IP degreeIP20

Three-phase 380v±20%, 50/60Hz

ModelPower capacity (KVA)Input current(A)Output current(A)Adaptable motor(KW)

vfd ac drive with control panel

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy

close left right