three phase 380v

The MV900 series is suitable for various high and low temperature heating applications,including preheating before welding,postheating after welding, and hot disassembly and assembly of rotors,such as heat treatment/postheating of circumferential welds,preheating of spade teeth,postheating of flange interfaces,preheating of anti-corrosion coatings for pipelines,preheating of coatings for main urban water supply pipelines,and flat blanket preheating for offshore platform shipbuilding.

The MV900 series is suitable for various high and low temperature heating applications,including preheating before welding,postheating after welding, and hot disassembly and assembly of rotors,such as heat treatment/postheating of circumferential welds,preheating of spade teeth,postheating of flange interfaces,preheating of anti-corrosion coatings for pipelines,preheating of coatings for main urban water supply pipelines,and flat blanket preheating for offshore platform shipbuilding.

ZK S100 adopts high performance VECTOR control technology, higher torque output in low speed. Good dynamic characteristics, super overload capacity to make it easy to meet the demands of variable applications.

1. MPPT efficiency more than 99%. 2. Drives well all 1/3 phase AC pumps and PMSM in solar pumping system. 3. VMP of solar panel can set by manual or MPPT automatically tracking. 4. Solar DC & Grid AC power input, 5. Short circuit, over load, over current... motor production. 6. Dry run & Full water tank protection. 7. The PQ (power/flow) performance curve enables calculating the flow output from the pump 8. Ambient temperature for using: -10 to +50˚C. 9. Inverter Power range: 220V: 0.75KW to 75KW. 380V/440/460/480V: 0.75KW to 250KW.